News

1. Liquor glass bottles are divided into high white, crystal white, plain white, milky white bottles and colored glass bottles, roasted glass wine bottles and frosted glass bottles, etc. What kind of wine should be used, such as Maotai Mostly milk white wine bottles are used, and transparent glass wine bottles are used for white wine.
2. Quality assurance system. Auditing the glass bottle factory has become an essential part of the purchase of liquor glass bottles. After the audit, the production plant's software and hardware equipment, technical equipment, and comprehensive quality can be specifically and accurately Evaluation. Bottle molds are essential for wine bottle quality inspectors. The quality first depends on the sealing line of the wine bottle, which is the part of the mold. The old molds generally have double sealing lines, so the mold needs to be off-machine for maintenance. The surface finish of the glass wine bottle is required for the spray color wine bottle, and the smooth appearance of the wine bottle directly affects the quality of the spray color wine bottle.
3. The tightness of the bottle body and the cap. This depends on the performance of the cap gasket. The cap gasket is between the wine bottle cap and the glass bottle, which mainly plays a sealing effect. Wine bottles generally do not leak or seep, so it is indispensable for the company to have good quality inspectors in the factory!
4. Liquor glass bottle quality specification. Quality is the foundation of an enterprise, so a good wine bottle directly affects the development of the enterprise. The customer's reputation and satisfaction are also the recognition of the enterprise. A good glass bottle factory first depends on their Partner, the reputation of the wine bottle production line production capacity users. The poor quality wine bottle is greatly damaged, the bottle wall is uneven, and the wine bottle machine is not beautiful when it is blown by the machine. If the table can't blow up, it will directly affect the beauty of the liquor glass bottle. So choose a glass bottle factory with reliable quality, so that your wine can appreciate a hundred times!
2. How are glass wine bottles made?

The glass wine bottle is produced with quartz sand. The specific operation method is as follows:
First of all, it is necessary to design and manufacture the mold, plus other accessories to melt into a liquid state at high temperature, and also to bake the converted glass tube with the high temperature fire of liquefied gas, and then add the blowing of the air blower to make the air blower. Various shapes are made under the blowing of the glass, and then injected into the mold, cooled, cut, and tempered to form a glass bottle. The glass bottle generally has a rigid mark, and the mark is also made of the shape of the mold.
In the whole process, the technical personnel for the construction of the craft wine bottle are relatively high, and the materials will be damaged if they are not careful, resulting in a lot of waste.
1. Pre-treatment section. The pre-treatment section of glass wine bottle spraying includes pre-removal, main-removal, surface adjustment, etc. If it is in the north, the temperature of the main-removal part should not be too low, and it needs to be kept warm. Otherwise, the treatment effect is not ideal;
2. Preheating section. After pretreatment, it will enter the preheating section, which generally takes 8 to 10 minutes. It is recommended that the glass bottle should have a certain amount of residual heat on the sprayed workpiece when it reaches the powder spraying room, so as to increase the adhesion of the powder. ;
3. Soot blowing purification section for glass wine bottles. If the process requirements of the workpiece to be sprayed are relatively high, this section is essential. Otherwise, if there is a lot of dust adsorbed on the workpiece, the surface of the processed workpiece will have a lot of particles, which will reduce the quality. ;
4. Powder spraying section. The key point in this section is the technical problem of the powder spraying master. If you want to create good quality, it is still very worthwhile to spend money on a skilled master
5. Drying section. The temperature and baking time should be paid attention to in this section. The powder is generally 180~200 degrees, depending on the material of the workpiece. Also, the drying furnace should not be too far from the powder spraying room, generally 6 meters. for good.